Category Archives: Uncategorized

How do I know my garbage disposal is broken? 

The design and purpose of garbage disposals are to shred food up and wash on down the pipes and into the sewer pipes. This helps keep the pipes clean and clog-free, which is great in helping keep the kitchen clean – unit it isn’t doing that.  

When the garbage disposal has a problem, all things to do with the kitchen stops. Is the garbage disposal broken for good or is garage disposal repair possible?  Here are five signs garbage disposal is broken and Thanksgiving dinner prep is temporarily halted: 

• Noises: A garbage disposal makes noises, rather loud and rough sounding. When those noises are a stranger or unusual noise from the norm, you need to check into it through the sink drain. By all means, first, UNPLUG the garbage disposal first!  With a flashlight, look down in the drain and see if there is anything hung up in the blades. It could be a lid, a small dish, a utensil, even a dishrag. If you find something, you can do a garbage disposal repair and remove the item.  Plug the garbage disposal back in and test it. If you’re still hearing the sounds, unplug it again and call a plumber. 
• Odors: Sometimes, in the midst of cooking a meal, we forget to do a last cleaning rinse of the garbage disposal. Then the old food and waste sit inside and start to smell. However, if you have done the final clean rinse and run of the garbage disposal and you’re smelling something, there is probably some stubborn food particles stuck. Sadly, you’ll need a professional garbage disposal repair for this problem. If the unit is 15 years old or older, time to start shopping for a new one. 
• Won’t Turn On: If your garbage disposal isn’t turning on, a simple garbage disposal repair to try is to push the reset button. If that doesn’t work, check the circuit breaker. Is it still not turning on? Call your plumber. 
• Water Leaking: Nothing is going to last forever, especially garbage disposals. As we mentioned at the beginning of this article, the garbage disposal is abused yet neglected. It is definitely the kitchen’s unsung hero.  Between the eighth and fifteenth year of your garbage disposal installation, you can expect water to start leaking from it, along with any food particles that left inside. There isn’t a garbage disposal repair for this – it is done. Time to pick out a new one and have it installed. 
• Constant Resetting: If you frequently have to press the reset button because the unit quits working, then your garbage disposal is headed to the end of the road. The reset button shouldn’t have to be pressed on any regular basis and there isn’t any garbage disposal repair, the unit needs to be replaced. 

Why is my disposal humming and not working?

As mentioned above, a odd noise or sound coming from your garbage disposal is usually an indication that something is jammed inside, hung up in the blades. If your garbage disposal won’t spin as normal and there is a humming sound coming from it when you turn it on, try the reset button first.  If that didn’t fix it. Then UNPLUG the unit and check inside the drain to see if there is something jammed around the blades. If none of this attempt at garbage disposal repair doesn’t work, then call your plumber. 

Are you concerned about how long does a typical garbage disposal last? With Thanksgiving and other big holidays coming up, you may be concerned about some strange noises your garbage disposal has had recently. You want to get any garbage disposal repair done now and out of the way, or if a replacement is what needs to be done, better now than a month from now, right?   Well, the average life span of garbage disposal is 10 years. If you’re not sure how old your unit is, look under the sink and there should be a label on the unit with the serial number and manufactured date, this can give you an idea if it is time to start shopping for a replacement unit. Call 419-546-8424 today for garbage disposal repair in Stryker, Bryan, and Napoleon, OH.

How often should HVAC be serviced?

As we mentioned above, Your HVAC system should be inspected, and a tune-up done by a professional no less than once every twelve months. A heat pump system should be inspected with a tune-up performed every six months. First time of the year in late spring, preparing for the hot summer heat arrival. The second time of the year the first part of fall, preparing for winter’s cold arrival.  This schedule will get you in before the “rush” of other homeowners and keeping this routine, along with your own homeowner HVAC maintenance plan, it will keep emergency repairs down to a minimum, maybe even eliminated! 

What is included in HVAC tune up?

A standard, professional HVAC tune-up includes three basic steps for the technician: 

• Inspection
• Cleaning
• Service

Repairs may be included, that is up to the HVAC service company standards and the technician’s decision based on the problem detected and the homeowner’s agreement. 

• The Inspection: The HVAC service technician will inspect all components of the equipment. This includes checking the wear and tear, check and clean the drain pan, check the refrigerant levels, the compressor, motor and make sure all components are in working condition. 
• The  Cleaning: A thorough cleaning will be done that goes beyond your homeowner maintenance duties of changing or cleaning air filter, cleaning the coils, and keep grass and weeds away from the outside component. 
• The HVAC Service: This step is the where you get your value on an annual inspection and tune up. If the technician detects any problems or possible problems with the air conditioning or heating functions, they will make any corrections they can. If they see there are parts to be replaced, or the system needs refrigerant added, they will discuss this with you, quoting you the cost, and move forward with the repair if you agree. 

How many years does HVAC last?

The lifespan of an HVAC system can be dependent on the brand and quality of the system. How well you keep it maintained and follow through with the professional inspection and tune-ups also have an impact on the lifespan.  With all things done as recommended you can get up to twenty years from your HVAC system. 

Is a clogged toilet a maintenance emergency?

If you only have one bathroom with a toilet, it gets clogged, and it overflows, you can attempt a few things to stop the flowing and get the clog to pass through to avoid emergency plumbing services.

Remove the lid from the tank and lift up the lever so that the water quits filling the bowl and tank. Next, using a home style plunger, plunge the toilet bowl several times, attempt the flush. Repeat as needed. If, after several attempts, the clog doesn’t bust on through and the toilet keeps overflowing; you need emergency plumbing services.

Logically, if you have a second bathroom with a working toilet, it would be worth saving you money and wait to call for plumbing services during regular business hours.Emergency plumbing services are typically those calls that are after hours Monday – Friday, on holidays or weekends.  While plumbing contractors are available during those times, it will cost you more than a normal day and time.

What to do if you have a leak?

1.    Turn Off The Water: Immediately find the water meter and turn the water off at the meter. This will stop any more flooding and damage. If you can’t turn it off, you must request emergency plumbing services from the city or a plumber.

2.    Documentation: This step is more for your insurance claim, but documentation is important before any clean-up or repairs are done.  This includes pictures, videos, and notes.

3.    Notify Insurance Company: Notifying the insurance company is the next call you need to make after you have the water turned off. They will have instructions for you and may have a list of qualified plumbers to provide.

4.    Determine the Source:  Look for a possible leak source, but if you aren’t finding it, call a professional plumber for emergency plumbing services. They will examine the damage already done to help them source the leak and go from there.  

5.    Fix the Issue: If you can make the repair yourself, that’s great! That saves you a deductible out of pocket and probably will be done faster than if you call emergency plumbing services. If you can’t fix it yourself, call a plumber. 

Who can fix water leaks?

When it comes to plumbingleaks, the best person to call is a professional plumber. If you have a handyman you use, they can often provide emergency plumbing services, but if it is something outside of their ability and scope, you must call a plumber. Making a plumber your first call gets the repair done faster and circumvents a lot of stress.  

If you don’t have a plumber on your speed dial, search on the internet for “emergency plumbing services near me” and you will find several listed. Keep in mind the first ten listed are necessarily there because they are the best. This is how their Google listing falls by different factors, including Google’s algorithm.

How long do emergency plumbers take?

This is all dependent on what time of the day, what day of the week you call, and if it is a holiday. Non-business hours, it could take an hour or more to hear from a professional plumber that has an answering service about their calls for emergency plumbing services.

The repair will depend on what is wrong, where the emergency is within your home, and if any emergency parts oremergency plumbing fixtures are needed. If the plumber doesn’t have something on their truck, they will have to order it, which could be the next business day. 

If your home has been having frequent issues with the sewer lines, cleaning them may not be enough. Call an experienced plumbing contractor and request a video inspection.  There may be something more than your sewer line is clogged, and a professional plumbing contractor will have the proper sewer line cleaning equipment to do the job right based on what the video inspection finds. 

How do you know if your sewer line is clogged?

Things aren’t draining and flowing as they should, so how do you know if it is a simple clogged line, or it is the main sewer line to your house? Here are three signs that will tell you it is the main sewer line and if you may need a professional plumber to do a main sewer line cleaning: 

• More than one drain is backed up
• Water is overflowing into different fittings
• The sewer clean-out has drainage in it 

So, what do each of those mean? Keep reading as we give you a detailed description and a closer look: 

Sign One: More than one drain is backed up. When the main sewer line clogs up, it will cause every drain in the house to back up, not just one. When it is just a simple clogged line, like the kitchen drain, we isolate the problem to one drain. 

Think of the sewer system for your home as a tree. The trunk of the tree is the main sewer line and the branches are the sewer lines that run to each water appliance.  Like a tree, if something is wrong with the trunk, the branches can’t grow and bloom. With your sewer system, if something is wrong with the main line, the smaller sewer lines can’t drain, so the waste material and water back up. 

Still not 100% sure if there is just one line or multiple lines backed up? Are any of these plumbing fixtures gurgling?   

• Bathtub
• Shower
• Sink
• Toilet

If more than one, or worse, all of them are, then you haves a clog in the main sewer line. The wastewater is moving slowly around and past the clog then hitting air pockets. That forces bubbles to surface and creates a gurgling sound. The more wastewater, the louder the sound and you’ll begin noticing a nasty sewer smell. Time to call a professional plumber for main sewer line cleaning! 

Sign Two:  Water is overflowing into different fixtures. Water will start backing up into other fixtures if there is a clog in the main sewer line because one of the branch drain lines is can’t drain into the main sewer line. The wastewater backs up and overflows into another drain line. 

This is where gravity comes into the plumbing: Water seeks the lowest level, so when it is overflowing, it will find the floors and the basement. If you aren’t sure this is what’s going on in your house, do the following test: 

• Flush the toilet and check the shower or tub for any gurgling sounds.
• While using the washing machine, when it drains, is it backing up in the shower, sink, or toilet?
• When you turn on the faucet in the bathroom sink, does water bubble or rise in the toilet? 

If you answer yes to any of those three tests, you haves a clog in the main sewer line and a professional plumber can do a sewer line cleaning to fix this problem. 

Sign Three: The sewer clean-out has drainage in it:Somewhere outside your home there should be a circular or concrete lid labeled “clean out”. Homes built prior to 1978 are an exception to this if the plumbing hasn’t been updated. 

Remove the cap from this and if there is sewer wastewater flowing out or standing in the pipe, you have a clog in your sewer line. Again, a professional plumber can do a sewer line cleaning for you and inspect the entire plumbing system to make sure there aren’t any other problems. 

How long does sewer line last? 

The normal lifespan of a sewer line 50 year and some last as long as 100 years. Factors that can make the difference is how the sewer line pipe was installed originally and what happens to the ground over the years and if routine sewer line cleaning is performed as recommended by professional plumbers. 

Can toilet paper clog a sewer line?  Toilet paper is not a major culprit to a clogged toilet. It only clogs the toilet when there is something else in the sewer line like a child’s toy, tree roots busting through the sewer line, or a low flow toilet doesn’t have enough push power. Regular sewer line cleaning by a professional plumbing contractor will catch these issues and get them out of the way so that you don’t have toilet paper clogging issues. When you need sewer line cleaning in Stryker, Bryan, and Napoleon, OH, call 419-546-8424.  

How Do You Troubleshoot a Home Air Conditioner?

Would you like to learn more about how to troubleshoot a home air conditioner? The steps are fairly easy. Please review the following bullet points to learn more.

• First of all, check your thermostat to ensure that it is set to the appropriate temperature that you desire. 
• The second thing that you should do is take a look at the condenser. If it is dirty or blocked, that may be the problem.
• Next, clean or change the air filter in your HVAC unit. It is generally recommended that homeowners change their air filters every three months.
• After that, you can see if any ice has formed on the coils of the air conditioner.
• Finally, you can check or clean the outdoor compressor.

How Do I Reset My Air Conditioning Unit?

In order to reset your air conditioning unit, the first thing that you should do is shut down your AC at the thermostat. You can find the shut-off switch on the air conditioning unit. Next, you will need to locate your circuit breaker box. If your home indeed has a basement feature, the circuit breaker box may be located there. Closets and crawl spaces are other places to inspect for the location of the circuit breaker box. Make sure that once you locate it, the AC unit is switched to the “off” position. You will need to wait thirty seconds before turning the circuit breaker back on. Homeowners can next turn the AC thermostat back on.

How Do I Test My Home AC?

Air conditioning repair is critical in the throes of summer. However, testing your AC before summer hits is a good way to safeguard against an unexpected HVAC emergency. In order to get started, locate the closest supply air duct to the indoor AC unit. Find a thermometer and tape it inside the unit. Allow the air conditioner to run for about ten minutes. Record the temperature.

Why Did My AC Suddenly Stop Working?

Has your air conditioner suddenly stopped working? The reason may be fairly simple, like a tripped circuit breaker. Scheduling regular maintenance visits will assist in terms of making sure that you don’t have any air conditioning emergencies.

Air Conditioning Service and Repair

There are a number of excellent air conditioning companies across the country. But which one to choose? When selecting an air conditioning company, it is important to choose one that is both local and reputable. Are they insured? Do they have any applicable certifications? Do they administer emergency air conditioning and heating service? These are all important questions to ask. Please feel free to conduct an internet search or ask a friend or neighbor for a referral. Knowing you have an HVAC company you can trust is important.

Air Conditioning Repair Near Me 24 Hours

It is important to note that when an HVAC company is called after hours, they will generally charge an extra fee. The convenience of having an emergency HVAC repairman comes with the added expense of the privilege.

Air Conditioning Repair for RV

How is the air conditioning functioning in your RV? If it isn’t working well, it may need to be replaced. Most RV air conditioners are not engineered to be opened and repaired. Even if an air conditioner repair for an RV is possible, it will be expensive. Generally speaking, most RV technicians replace any roof AC that exhibits significant problems.

You need an HVAC company that knows how to complete air conditioning repair in Stryker, Bryan, and Napoleon, OH, with proven results. Call Woolace & Johnson at 419-546-8424 to speak with our staff about making an appointment today!

Can plumbers detect leaks?

Hidden water leaks cost homeowners hundreds to thousands of dollars annually. Not only is this money wasted on the water bill, but this includes money spent on repairing water damage by water leaks. Before you call a plumber, you can determine if you a water leak yourself.

First, turn all the water off inside your home and the outdoor spigots. Then go check the water meter, if it is running, and you know for certain that there isn’t any water on inside the house, then you have a water leak on your side of the meter. If the meter isn’t turning, but you see a sign of water leaks on the ceiling or walls, there is likely an internal water leak that needs the attention of a plumber.

Professional plumbers have leak detection equipment that will accurately and quickly find a water leak if there is one.  Before the leak detection equipment, they have today, they would use ground microphones and/or listening discs, acoustic listening devices, to find a water leak.

Other means a plumber has of detecting a water leak:

• Plumbing cameras
• Vision inspection tools

These are both valuable tools for a plumber because they can pinpoint the precise source of a water leak fast, especially if the plumber has a general idea of the location. The visual aid a plumber has with this equipment allows them to even evaluate the options to repair the water leak.

How Plumbers find leaks?

Unless a water leak springs happens in a clearly visible pipe, you may not realize you have a water leak until one of two things:  Your water bill is an excessive amount one month or you see water stains on the ceiling, floor, walls, or worse, a water puddle in or under your house.

This is where you realize the benefits of hiring a professional plumber. Water leak detection is one of their most sought-after services and skills.  The techniques that most licensed plumbers use that will give them an exact location of a water leak and why it is leaking are:

• Acoustic listening device: As we mentioned earlier, ground microphones and listening discs have become a basic tool for plumbers to detect and pinpoint a water leak. This technology allows them to listen for water leaking noises through ceilings, floors, walls, even concrete. 
• Heat scanner: There are some areas where the noise of the water leak is too deep for the acoustic method described above won’t work. In these instances, a professional plumber can use a heat scanner to pick up the change in temperature from where water isn’t escaping to where the water leak is located. 
• Video pipe inspection: To get a precise leak detection, plumbers have miniature cameras today that are mounted on a long cable made of fiber optics. The camera relays the images to a monitor and the plumber can see the inside of water pipes, including drainpipes and sewer pipes. The plumber can see clogs, water leaks and other information that helps them provide a better service. 
• Professional Training: For a professional plumber to provide the best detection of a water leak, the best tool they can have is a professional training, both for getting their license and ongoing training that keeps them up-to-date with the latest equipment and methods that allow them to do the best job possible.

Is there a tool to detect water leak?

We’ve mentioned several tools that plumbers use to detect where a water leak is, from sound detection that uses headphones and microphones to heat detection and cameras. The plumbers of yesteryear training will still rely on their own skills of listening for running water underground and running through water pipes. Is one way better than the others? It all depends on the plumber’s preference and the water leak location.  

Water leaks are expensive two of which affect a homeowner directly: utility bills and water damage.  Another way it costs all of us is the waste of a natural resource that we expect and need daily. Repairing a water leak when it is discovered is one of the best ways to conserve that natural resource. For your water leak repair in Stryker, Bryan, and Napoleon, OH, call Woolace & Johnson today at 419-546-8424!

Burst pipes are common household plumbing issues that every homeowner will have to contend with at some point. Whether it is with the plumbing network inside the house or the water pipes that supply the water to the house, they can burst without warning. This often leads to temporary chaos until the gushing water is stopped, and sometimes, it is an easy, minor fix. Other times, it can be a major repair that only a qualified plumber can handle.  Some common reasons that you may experience a burst pipe are: 

Can pipes burst in warm weather?

Every homeowner should make it a routine to check the water pipes all year long for possible leaks, signs of water damage, or possible burst pipe.

1. Rusted Pipes: Pipes will only last for so long, over time, they rust and wear out. Too much rust makes them vulnerable to a burst pipe.  
2. Hard Water: Hard water is caused by a high content of calcium and magnesium, and while these are not harmful to us, they are hard on water pipes, causing corrosion, holes and eventually burst pipe.
3. Poor Installation: Pipe leaks that are installed poorly have ill-fitted connections.

How do you know if a water pipe burst 

The following are seven indications you may have a burst pipe.

• Water Pressure Fluctuates Up and Down
• The Water Has Strange Appearance or Color
• A Rotten Eggs Odor
• Puddles Under Sinks
• Sound of Water Running with Faucets Off
• Noisy Pipes
• Excessive Water Bill

How do you deal with a burst pipe?

There are things worse than a burst pipe, but as a homeowner, when it happens, it is hard to imagine that. Winter is the most troubling time for weak water pipes, so when a burst pipe happened, you must act fast. We recommend the following steps:   

• Turn the water off at the main – this will completely turn your water supply off. If the water has reached any electrical sockets, breaker box or fuse box, turn the electricity off too.
• Drain the water faucets – cold water taps first, flush the toilet to empty the tank, turn off the water heater, then empty the hot water taps.  
• Open the cabinets – this lets warm air in, important during the winter.
• Clean up -With any luck, you’ll know right away where the water came from, but either way, clean up the mess so you don’t have water sitting somewhere to form mildew and mold.
• Document – Once you have the emergency water flow contained, take pictures and document the damage to your home and your possessions. Throw nothing away, you’ll need this for evidence for the insurance adjuster.

While it’s common to see your water drain slowly when there is a clog, you can usually use a plunger and drain cleaner to clear it. If this doesn’t work, a professional with a plumber’s snake or auger, might be the solution to getting the water flowing again. If you’re hearing gurgling noises or if foul smells are coming from the drains you probably have a serious clog, possibly a sewer problem. Black sludge coming up also indicates a serious clog that could be create a health hazard.

Whether you have a plumbing emergency or a basic clog, if you want to have a professional drain cleaning service clear the clog, count on the team at Woolace & Johnson. We will get your clogs cleared safely and effectively. Get help today by calling 419-546-8424.

How do plumbers unclog drains?

When plumbers come out to unclog your drains, they apply their skills and use special tools to get it cleared. For major clogs, plumbers have two major tools they can use to unclog your drains:

• Motorized drain auger: A motorized auger or drain snake, which is a large metal coil, gets sent down into the drain until it hits  the clog. The motor drills the coil into the clog until it breaks up.
• Hydro-jetter: This device uses a hose and directional nozzle to send high-powered jets of water blast through the drain to clean it, washing away all debris and material clinging to the drainpipe.

How often should drains be cleaned?

Regular maintenance is good for all areas of the house including your plumbing. Drain cleaning should be a part of your regular maintenance, and it’s recommended that you have your drains cleaned about every two years. This is especially true if you have an older home to clear out any muck that’s collected over time. Regular cleaning keeps your drains clear of clogs.

While regular maintenance will keep your clogs cleared, to keep your commercial building cool and energy efficient you may want to consider a cool roofing solution.

How much does drain cleaning cost?

For simple clogs, you may only need to spring for a plunger and some kind of drain cleaner, although we don’t recommend strong chemical cleaners that can damage pipes over time. For serious clogs, however, you probably want to call a plumber for drain cleaning. For clogs in tubs, showers or bathroom or kitchen sinks or toilets, you can expect to pay anywhere between $110 to $215, whereas cleaning out a laundry drain will cost about $150. Major clogs in your sewer line will cost a little bit more. Sewer drain cleaning will cost between $200 to $400.

What is a drain cleaning snake

A drain cleaning snake or plumber’s snake or auger is a device used to clear drains of clogs. These devices consist of a coiled metal wire and either a crank or motor to send the wire through the drain. The coiled wire is sent through the drain and drills through the clog to break it up.

Drain bladder vs snake

A drain bladder is another device plumbers use for drain cleaning, and is used in certain circumstances over a drain snake. Certain kinds of clogs like grease clogs may not be wholly cleaned using a snake. The bladder forces water through the system under high pressure to clear the clog. It’s attached to a water hose and filled with water. As it fills with water, it expands and then the water is released to scour the drain and clean it. The bladder can also be used in conjunction with a drain snake. The bladder is used first to clear as much of the clog as possible, and then the snake is run through the drain afterward to finish up.

Does baking soda unclog drains?

For minor clogs, a mixture of baking soda and vinegar can be used to clean the drain. To clean the drain, hot water is first poured down it, followed by a solution of vinegar and water (about 1 cup each) and baking soda. As the vinegar and baking soda bubbles, it loosens the clog. Insert the drain plug for about 5 to 10 minutes before flushing with boiling water. The process may need to be repeated until the clog is cleared. 

What is the best drain cleaning product

Different drain cleaners are used for different kinds of clogs. Enzyme-based drain cleaners can be used monthly to clean out clogs caused by material like hair or paper but won’t clear out grease or soap scum. Alkaline based cleansers are best for grease, food, and soap scum. These cleansers turn the clogged material into a soap-like material that dissolves under water. Acidic cleansers use sulfuric or hydrochloric acid can clear just about any kind of clog within 15 minutes. These cleansers are highly corrosive and toxic, and not often sold with other drain cleaners. Frequent use of strong chemical cleaners can affect your pipes, in particular those made from aluminum chrome, stainless steel or galvanized steel.

HVAC Service vs Tune-Up

Is there a difference between an HVAC service and a tune-up? Ultimately, no there isn’t. The two are typically used to qualify the same thing: HVAC service and cleaning. During a service or tune-up, the technician is looking for areas of concern and, if possible, can begin some repairs right then and there. The word service and tune-up are essentially interchangeable in this sense. You’ll generally want to service or tune-up an HVAC system in the spring and fall, just before the weather gets really bad. Doing so will ensure there are no surprises and no issues during severe weather days. It’s also a good idea to have other areas of your home, like the cool roofing, checked to ensure that everything is operating smoothly. 

Frequently Asked Questions

• How much does it cost to service an HVAC system?
  • The overall cost will vary from technician to technician. Most will include a servicing fee which can be anywhere from $50 to $100. Meaning, your total cost for servicing could be in the $2-300’s. 
• What is HVAC servicing?
  • This is the process of examining and inspecting your HVAC system. A technician will go through looking for areas of wear, concern, damage and more. If they find anything, they’ll document it and go over repair or replacement options with you. 
• What is HVAC and how does it work?
  • HVAC stands for heating, ventilation, and air conditioning. It’s generally the central system the provides heat and cool air throughout you home. The system utilizes electricity or gas to push forced air throughout the home. The air conditioner uses coolant and condenser coils to cool the air before sending it through the ducts. 
• What is the difference between HVAC and air conditioning? 
  • There really is no difference. HVAC stands for heating, ventilation, and air conditioning. The abbreviation is to reference every component of the forced air system in your home and air conditioning happens to be on that list. 
• What is the purpose of HVAC system?
  • The purpose of an HVAC system is to provide a system for hot or cold air to flow through your home. Your heating and air conditioner use the same ventilation to push the air throughout the property. 

If your AC is not working and you need AC service in Stryker, Bryan, and Napoleon, OH, you can count on the professionals at Woolace & Johnson. Schedule a repair by calling 419-546-8424.

Your air conditioner not turning on is just one sign your air conditioner needs repair. Some other signs you need air conditioning repair include:

• Blowing warm air
• Exhibiting poor air flow
• Wrong thermostat setting
• Leaking
• Bad or unusual odors
• Making loud noises
• Electric bills are unexpectedly increasing
• Aging (the unit is more than 10 years old)

Why is my AC running but not cooling?

One frequent problem people have with their air conditioning is the system is coming on but it’s blowing warm air. This may be a sign you need air conditioning repair. Any number of issues could be causing this problem. The first thing to do is check all your vents to see if they are open and then check the thermostat to see if set to the temperature you want. If the vents or thermostat aren’t causing the problem the primary suspect is most often a dirty air filter. A dirty air filter can prevent proper air flow or cause the evaporator coils to freeze and slow air flow as well. Cleaning or changing the filter regularly is essential for the AC to operate properly. Another possibility is a problem with the fan or fan motor. Your fan might not be getting enough electrical power or you may have a refrigerant leak. 

Why won’t my AC cool my house down?

Sometimes, instead of blowing warm air, the AC is cooling, but it’s not getting the whole house cool. You may wonder, “Why is AC not cooling enough?” As when it’s blowing warm air, the AC might not be cooling enough for many reasons. If any of your vents are closed, that could limit air flow throughout the house. Make sure all the vents are open so the home cools evenly. Another possibility is that you may have a refrigerant leak. It’s also possible the system you have is the wrong size for your home. If the system is too large, it will cycle off and on quickly, and not cool efficiently. Too small of a system has to work much harder to cool the home. Having the wrong size of AC may lead to the system breaking down prematurely. 

Finally, if your system is more than 10 years old, it may be time to consider replacing it. The older a system gets, the more its parts will wear, the more often it will require repairs. Aging and worn parts put a lot more strain on the system, and it works less efficiently.

If your air conditioner isn’t cooling enough, it’s possible the problem may not be in the system at all. Your roof affects how cool or warm your home is and can affect your home’s energy efficiency. One way to improve your home’s energy efficiency is through roof restoration.

Air conditioner repair vs. replace

It can sometimes be difficult to decide whether you just need air conditioning repair, or whether the unit needs to be replaced. One of the major factors in the decision will be the air conditioner’s age. Although an air conditioner can be as good as new at 10 years old, it’s not often likely. Most air conditioning systems are designed to last about 10 to 15 years. The older an air conditioner gets, the more likely it will begin to break down frequently. If you are beginning to spend more in repairs than it would cost to get a new unit, you’ll save money in the end. You can use a simple formula to determine whether it’s better to repair or replace your air conditioner. If you multiply the cost of a repair by the unit’s age and that number turns out to be more than the price of a new unit, then a replacement is in order.

Air conditioning repair emergency

Anytime your air conditioner is malfunctioning can be air emergency requiring immediate air conditioning repair. Any issue from refrigerant leaks to fan motors stopping because they aren’t getting enough power could be an emergency. If your AC is down for any reason in Stryker, Bryan, and Napoleon, OH, and you need an emergency repair, give our team at call at 419-546-8424.  We provide emergency air conditioning repair service 24/7.

Air conditioning repair parts

When an air conditioner breaks down, it’s usually just one part that causes the whole system to fail. Every part in an air conditioner works in unison with the other parts to make the system run  smoothly. While we don’t sell parts individually, if you need a part replaced or repaired professionally, we are the AC service company to rely on. Our technicians are highly trained to repair and replace parts for air conditioning systems from many of the leading manufacturers.